I used my home made spudger to push the new plug into place.ģ- download free "Macs Fan Control" This is how I was alerted to the fan not working in the first place. so lifted old fan out, pulled upward on the plug it popped right out with very little effort. couldn't get it to slide under plug, there's an edge where plug fits. it was the same brand/model.ġ- no T6 screwdriver- was careful using needle nose players to loosen 2 screws protruding up, then use a small phillips to push real hard into the T6 slots, SLOWLY turn, also used a small flat head screwdriver (for eye glass repair) was able to grab thread on T6's, made a small mark with screw driver across the top so I could see when it started to turn.Ģ- no spudger -made one cut a little strip 1/2" x 1 1/2" of plastic.
Worked like a charm! Took less than 20 minutes.
0 kommentar(er)
